4 stage audio and 6 stage visual LCD display from 2.0m to 0.4m
2 ultrasonic sensors installed on the trunk or between back lamp and bumper. (60 - 70cm from the ground and 30cm from the each side)
Display's distance, direction and sound
Aids reversing in all weathers
Easy installation on any vehicle
Especially design with wireless LCD display
No scratches
Approval: CE, FCC
Specifications
Detection: ultrasonic sensor
Input power: DC 9V to DC 16V ( 24V with special wire)
Operating temperature: from -25 to 60 degrees Celsius
Length of wiring: 2.5m (sensor), 4m (main modules and monitor power wire)
Detection range display: 0.4m to 2.0m
Current consumption: under 50mA (main module), under 85mA (monitor)
Dimensions:
Main control module: 70 (W) x 93(L) x 33(H)
Wireless monitor: 74 (W) x 52(L) X 40(H)
Weight (with blister packing): 400g
Operating frequency: 315MHz/433.92MHz
Operating methods:
When in reverse, the system sounds a beep and senses the first detection zone (with 1.6m distance), second zone at 1.0m and the third zone at 0.6m the alarm sounds progressively
From 0.4m the alarm sounds continually indicating the driver to stop
For the driver with hearing problems the displays shows 0.0m the actual distance is 0.1m
This system also indicates the closest side to an object left or right
